Free Mechanical Aptitude Test Practice Questions and Answers

This free test will cover questions from the more common Mechanical Aptitude tests. These tests include questions with varying difficulty, format, content, and time frame. 

Free Mechanical Aptitude Test with Answers

Mechanical aptitude tests (also known as mechanical reasoning tests) assess your basic mechanical knowledge, i.e., your ability to understand basic mechanical concepts and apply them to various scenarios.

The mechanical test questions will usually contain one or more images followed by multiple-choice questions with a time limit, covering topics such as gears, thermodynamics, fluid mechanics, and more. Let’s review a few examples, solving tips, and common exams that require mechanical knowledge.


  • Electricity 

1. A device used to store electrical energy is called a:

A. Resistor.

B. Diode.

C. Capacitator. 

D. Inductor

Answer:

The correct answer is C.

The question asks for the device that is used to store electrical energy. Let's go through the options one by one.

A. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. It is primarily used to limit current and/or divide voltages in electrical circuits. It doesn't store energy but rather dissipates it in the form of heat.

B. A diode is a semiconductor device that allows current to flow in one direction but not another. It is commonly used for rectification (converting alternating current to direct current), among other applications. While it can be part of circuits that store energy, the diode does not.

C. A capacitor is an electrical component that stores and releases electrical energy in a circuit. It stores energy by accumulating an internal imbalance of electric charge between its plates, and it can release that stored energy when needed. Therefore, it is the device used to store electrical energy.

D. An inductor is an electrical component that stores energy in a magnetic field when an electrical current is passed through it. While it does store energy, it is not electrical energy per se but rather magnetic energy.

Moreover, it's commonly used to store energy temporarily and is often used in filtering applications and energy storage in inductive-based convertors but is not primarily designed for electrical energy storage in the way a capacitor is.

Based on the above explanations, the correct answer is C - Capacitor. This is the device that is specifically designed to store electrical energy in an electric field between its plates.

Create Your Own Assessment Prep Kit!

Job-seeking can be a long and frustrating process that can take several months. As part of this journey, you'll have to take a number of pre-employment tests or video interviews.

We've designed our Premium Membership to guide you through the entire journey: 

Mix & match 3 PrepPacks of your choice at a 50% discount for 1 month/3 months/6 months.

 


2. What is the total resistance if R1 = 4Ω and R2 = 6Ω?

Mechanical Reasoning Question 2

A. 2Ω
B. 10Ω
C. 24Ω
D. 8Ω

Answer:

The correct answer is B.
In a series circuit, the total resistance is the sum of individual resistances:
Rtotal =R1+R2=4Ω+6Ω=10Ω.

 

The USPS 955 is a unique test built by Ramsay for the US Postal Services for maintenance positions. As such, the topics and questions in the USPS 955 Test are much more profession-oriented, meaning they focus on practical mechanics such as Hydraulics, Pneumatics, Workshops, and Tools, as well as Electricity Concepts (like the previous questions) and Components.

Our newly updated 955 PrepPack offers hundreds of practice questions in practical mechanics and maintenance, which are accompanied by thorough explanations and guides. For a price starting at 79$, you can begin your road to a career as a USPS 955 Maintenance worker today, by maximizing your potential ahead of the test.

See What People Say About Our Prep Pack

So worth it
"Everything that I needed to know was in the study guide. I felt very prepared for the test and confident in my answers. I loved that they explained every possible answer and why some were better choices than others. Ordering this study guide was the best decision, it was so worth it".

Stephanie V. On USPS Exam 955 Practice

⭐⭐⭐⭐⭐ (More reviews)

Electricity questions can also be found in our IBEW PrepPack, Ramsay Mechanical PrepPack, Ramsay Electrical PrepPack, NOCTI Electronics Technician, and CAST PrepPack. Let's look at two examples of specific questions from maintenance mechanical exams:

You can find more mechanical sample questions on our Free ASVAB Practice Test

  • Pneumatics and Hydraulics 

3. There are four cycles in IC Engines: compression, exhaust, intake, and expansion. In two-stroke engines, two functions are performed in one stroke.

Which of the following stages occurs simultaneously?

A. Compression and exhaust.
B. Intake and expansion.
C. Compression and intake.
D. None of the above.

Answer:

The correct answer is C. There are two processes involved in a two-stroke engine: Compression stroke and Power stroke. In compression stroke, the inlet port opens and the air-fuel mixture enters the chamber, and the piston moves upwards compressing the mixture. In the power stroke, the heated gas exerts pressure, and the piston moves downwards during the expansion. Therefore, only C is the correct choice. The following figure summarizes the two-stroke engine cycles.

Mechanical Reasoning Answer 3

 

  • PLC and I/O

4. Which of the following executes logical commands to control sensors and actuators?

A. Processor.
B. I/O module.
C. RAM.
D. ROM.

Answer:

The correct answer is B.
The processor (CPU) reads the stored program in Random Access Memory (ROM) with the help of the operating system that is downloaded in Read-Only Memory (ROM). The processor makes logical decisions based on the PLC program. However, these decisions are executed with the help of the I/O module. Therefore, B is the correct choice, and A, C, and D are incorrect.

Amazon has created a unique test to assess its candidates' skills and mechanical knowledge as well as their behavioral and personality characteristics meaning that to become an Amazon Maintenance worker, one must prepare on a few fronts. To help you prepare JobTestPrep has created a unique, comprehensive, and updated Amazon Maintenance worker practice prep that includes:

  • Three different maintenance tests for different versions of the Amazon Maintenance Test along with specific Mechanical practice questions for topics such as Pneumatics and Hydraulics, Tools, and Electricity.
  • Full Work Simulation and Work-Style Assessment for Amazon’s Behavioral, and Situational Judgment Tests.

Take advantage of our extensive and accurate practice for as little as 79$ so that you can prepare for your Amazon assessment with confidence.

See What People Say About Our Prep Pack

Amazon Maintenance Technician Test Prep
"I am extremely satisfied! The customer service is amazing!".

Maria M. On Amazon Maintenance Technician Prep

⭐⭐⭐⭐⭐ 

Maintenance questions can also be found in our USPS 955 PrepPack, Ramsay Maintenance PrepPack, Walmart Maintenance PrepPack, Elevator (EIAT) Apprenticeship PrepPack, and UPS Mechanic PrepPack.

Let’s continue to different concepts in basic mechanics – beginning with Kinematics (Velocity).


  • Kinematics  

5. In which way is the wagon accelerating? (If either, mark C.)

Mechanical Aptitude Sample exam explanation
A. a
B. b
C. c

Answer:

The correct answer is A.

The pendulum is moving backwards; therefore, the car is accelerating in the opposite direction. That happens when an object is in an accelerating system, in the same way you feel yourself pulled backwards when the car is speeding up or forwards when it is braking.
Remember the physical principle: When an object is within an accelerating system (another object that accelerates or decelerates), the force on the inner object will be in the direction opposite to the acceleration.

Note: Deceleration is considered a backwards acceleration.


 6. Which ball will reach the floor first? (If equal, Mark C.)

Mechanical Aptitude Test

A. a

B. b

C. c

Answer:

The correct answer is C.

Gravity is applied to both balls equally, and the vertical distance they ought to pass is identical. The time needed for both balls to hit the ground is identical, regardless of the horizontal velocity component.

Therefore, it can be deduced that both balls will hit the ground simultaneously.
Remember the physical principle: When an object falls under the influence of gravity, its vertical velocity does not depend on the horizontal velocity.

 

Learning physical principles is essential because it provides you with a solid foundation for solving a wide range of mechanical problems. Imagine you have to answer various mechanics questions, such as the one above. There are countless ways these questions can be asked, and it's impossible to memorize answers to every single one.

However, if you understand and learn the basic physical principles that underlie these questions, you'll be well-prepared to tackle any variation of them. It's like having a set of tools that you can use for different situations. You won't need to memorize specific answers because you'll know the fundamental ideas.

At a price starting at 79$, you can begin practicing hundreds of mechanical questions while reading our Mechanical Study Guide, which will help you learn and remember basic physical principles.

See What People Say About Our Prep Pack

Mechanical Aptitude Test Practice
"Very Satisfied. I have been working with Controls, Logic, PLC's, VFD's, and automated equipment for 29 years and the information in these modules is the most accurate I have ever seen. #RECOMMEND".

James. On Mechanical Aptitude Test Practice

⭐⭐⭐⭐⭐ 


7. Which bird will experience less resistance flying? (If equal, mark C.)

Mechanical Aptitude Test

A. a

B. b

C. c

 

Answer:

The correct answer is A.
In picture A, the bird flies with her wings backward, minimizing the contact surface with the wind and creating less resistance. The bird in picture B extends with her wings and legs perpendicular to the wind direction, thus increasing the contact surface with the wind, creating much more resistance.

The same phenomenon makes a crumpled piece of paper fall faster than an open sheet of paper, which has more surface and more resistance.

Remember the physical principle: The larger the surface of contact with air/wind, the more resistance (force) is created.

Kinematics questions may ask about basic concepts, and movements, and sometimes may include different types of calculations. Kinematics questions can also be found in our Ramsay Mechanical PrepPack, Bennett PrepPack, Wiesen PrepPack, and Delta BMAR PrepPack.


Another type of question that involves calculation is Quantitative questions. These questions may feel as if they should be included in Numerical Aptitude tests (and really are occasionally) – but they have great importance in mechanics. Let’s look at an example:

  • Quantitative Sample Question 

8. Which granary can hold more wheat? (If equal, mark C.) 

Mechanical Aptitude Test

A. a 

B. b

C. c

Answer:

The correct answer is C.

This question can be solved in a straightforward calculation of the volume of the granaries, using the formula of a cylinder’s volume:

V = π x R2 x H

Where: π = 3.14, R is the cylinder’s radius, and H is the cylinder’s height.

Calculating:
Answer A: 4 x π x 52 x 10 = 4 x π x 25 x 10 = 3.14 x 100 x 10 = 3,140
Answer B: π x 52 x 40 = π x 25 x 40 = 3.14 x 1,000 = 3,140

However, there is no need for such lengthy calculations. As we can see, the height of the cylinder affects the volume of a cylinder linearly, meaning 4 cylinders with height H are equal in volume to one cylinder with height 4H:

V (4 short) =4 x {π x R2 x H} = 4 x π x R2 x H
V (1 tall) = π x R2 x 4H = 4 x π x R2 x H

Remember the physical principle: The volume of a cylinder is linearly dependent on its height.

Note: The same does NOT apply to the cylinder’s radius since the R in the formula is squared. In that case, the volume of one cylinder with a radius of 2R will be equal to the volume of four cylinders with a radius R. The volume of one cylinder with a radius of 4R will be equal to the volume of sixteen cylinders with a radius R.

The Ramsay Mechanical Test is a household name in the mechanical aptitude assessment world. Many companies use Ramsay Mechanical test results to screen their candidates for different positions, including Maintenance Technicians, Electricians, Auto Mechanics, Welders, and Field Service Technicians.

There are many versions of Ramsay, including tests for Amazon Maintenance positions, UPS Maintenance, USPS 955, Ramsay MultiCraft Test, and Ramsay Electrical Test, which comprise similar topics but in different formats – narrow time frames, increased difficulty, number of questions, and distribution among question types.

To be fully prepared for whatever test you will face, we have devised a comprehensive PrepPack, which includes:

  1. Full Ramsay Mock simulations to emulate the format and content of the test.
  2. Focused practice tests for different Mechanical question types.
  3. Extensive study guides.
  4. Detailed explanations and solving tips for hundreds of questions.

For a price starting at 79$, you can begin your precise and comprehensive Ramsay Mechanical Test practice today, unleashing your full potential.

See What People Say About Our Prep Pack

Ramsey test for Goodyear
"I purchased this test prep and studied for four days and passed the Ramsey test for Goodyear, I'm sure if I had more time I would have done even better. Thank you".

Terry H. On Ramsay Mechanical Test

⭐⭐⭐⭐⭐ (More reviews)


Let’s continue to the next question type – Dynamics – and mainly Thermodynamics.

  • Thermodynamics 

9. Which of the three following diagrams is correct?

Mechanical Aptitude Sample Test

A. a

B. b

C. c

Answer:

A pressure difference on both sides causes the bending of the partition. That pressure difference is determined by the level of water in each container.

The pressure is determined by the height of the water on the container – the higher the water – the greater the pressure.

In A, the partition bends to the right, suggesting the pressure is greater on the left side. That is consistent with the higher water level on the left side.

In B, the partition is flat, suggesting there is no pressure difference between its two sides despite the different water levels. Therefore, this answer is false.

In C, the partition bends to the left, suggesting the pressure is greater on the right side. That contradicts the higher water level on the left side. Therefore, this answer is also false.


10. Two balloons are placed side by side. Balloon A is inflated fully, while Balloon B is only half-inflated.

Which balloon has more air pressure inside? (If equal, mark C)

mechanical reasoning question 10

A. a

B. a

C. c

Answer:

The correct answer is A.

The question asks us to compare the air pressure inside two balloons: fully inflated (Balloon A) and half-inflated (Balloon B).

Air pressure in a balloon is generally determined by the amount of air it contains and the volume it occupies.

A fully inflated balloon is generally stretched more tightly than a half-inflated balloon, and therefore, the air molecules inside are compressed into a smaller volume than they would be in a half-inflated balloon. This compression results in higher air pressure.

So, in this scenario, Balloon A, which is fully inflated, would generally have more air pressure inside it than Balloon B, which is only half-inflated.

 

The Edison Electric Institute CAST (Construction and Skilled Trades) serves as a standardized assessment to evaluate the aptitude and skills of candidates applying for various electrical and energy industry positions.

As such, the test includes different mechanical concepts and questions – in electricity, velocity, and thermodynamics, among others as well as many cognitive sections – including Mathematics, Reading Comprehension, Table Reading, Spatial Reasoning, and more.

Therefore, practicing for the CAST exam requires time and an extensive, specific. and accurate preparation.

For a price starting at 79$, you can start practicing our CAST PrepPack today and improve your skills and knowledge in all the CAST sections simultaneously.

See What People Say About Our Prep Pack

Worth every penny!
"I took the test for the first time 7 months ago and failed. This time got the test prep and passed! Thought it was way easier after taking the test prep".

Steve N. On CAST Test Prep

⭐⭐⭐⭐⭐ (More reviews)

Thermodynamics questions can also be found in our IBEW PrepPack, EEI TECH PrepPack, EEI MASS PrepPack, and NJATC PrepPack.

Let’s continue to Simple Machines – concerning mainly Pulleys and Cogwheels.


Simple Machines 

11. Who will need to apply more force to lift the weight? (If equal, Mark C.)

Mechanical Aptitude Test

A. a 

B. b

C. c

Answer:

The figure in B has a wheel to reel in the rope. However, this wheel does nothing to divide the force and only changes the pulling from a linear motion in A to a circular motion in B.
Remember the physical principle: In a pulley system, the wheels that reduce applied force are supporting wheels, not wheels that only change the motion’s direction.


12. In which direction will the wheel spin? (If either, mark C.)

Mechanical Aptitude Test

A. a

B. b

C. c

Answer:

The correct answer is B.

A band connects the two wheels on the left; therefore, the top wheel will spin counter-clockwise. The two wheels at the top are connected by a rod; thus, both rotate in the same direction. The wheel in question is connected by a band to the top right wheel and influenced by its rotation.

 

Tip: In a pulley system, the more pulleys there are, the easier it is to lift a weight, but you'll have to pull more rope. When solving simple machine questions identify the number of pulleys, the direction of force, and any other relevant factors.

Confirm the direction in which each wheel or pulley will turn based on the initial force or motion.

One final thing – if you have time, quickly verify if your answer makes sense. For example, in a multiple-pulley system, the force required to lift a weight should be less than the weight itself due to the mechanical advantage.


 

 13. In which direction does the grey wheel turn? (If neither, mark C.)

Mechanical Aptitude Test

A. a

B. b

C. c

Answer:

The correct answer is A.

When contact is made between the rack (toothed belt) and the cogwheels, a conversion occurs from linear to angular velocity. The location of the point of contact is critical.

The point of contact between the red cogwheel and the rack is in the lower part of the red cogwheel. The counterclockwise angular velocity induces a linear velocity to the right.

The point of contact between the grey cogwheel and the rack is in the grey cogwheel's upper part. The linear velocity to the right (determined by the rack) induces an angular velocity in a clockwise direction. The process can be exemplified by the blue arrows, which show where each part of the wheel is moving under the rotation conditions:

Simple Machine questions – which mostly include either wheels and pulleys or cogwheels, usually require prediction about outcomes of specific actions – either movement of objects, direction of rotation, or other options.

 

Simple Machines questions can be found in our Bennett PrepPack, Plumber Apprenticeship PrepPack, Ergometric FireTEAM PrepPack, and DAT ( Differential Aptitude Tests) PrepPack.

Let’s look at another Mechanical Aptitude question type – Force and Movement. This is a common topic in mechanical tests and is found in most assessments, including Ramsay Mechanical and Maintenance exams. Let’s proceed.


  • Force and Moment Sample Question 

14. In which direction should the acrobat move his body to balance the seesaw? (If neither, Mark C.)

Mechanical Aptitude Sample Question

A. a

B. b

C. c

Answer:

The correct answer is B.

A seesaw is an example of a first-class lever, where the fulcrum is between the effort and load. For the seesaw to be balanced, the torque applied by the acrobat must increase. Since the weight of the acrobat is constant, the only way to increase the input torque is by increasing the distance from the fulcrum.

Moving in direction B will shift the acrobat’s center of gravity farther from the fulcrum, resulting in greater torque, thereby balancing it.


15. Which pendulum will swing faster? (If equal, mark C.)

Mechanical Aptitude Test

A. a

B. b

C. c

Answer:

The correct answer is A.

Pendulum A has a shorter string; therefore, it will swing faster.

Intuitively, the shorter pendulum has less distance to travel in every cycle and, therefore, will move faster.

The bob's mass is irrelevant since the pendulum is affected by gravity, which applies the same acceleration on each body, regardless of its mass. Both bobs accelerate the same; therefore, their mass does not affect the pendulum’s movement.

Remember the physical principle: The only thing that determines how fast a pendulum will swing is its string length.

Force and Moment questions can also be found in our Ramsay Mechanical PrepPack, Bennett PrepPack, Wiesen PrepPack, and Delta BMAR PrepPack.


List of Mechanical PrepPacks 

You can find here the full list of the most common Mechanical Tests PrepPacks, which include different questions aimed to provide precise practice and prepare you for your upcoming test:

 

 

Ramsay, Amazon, EEI, Bennett, Wiesen, Walmart, UPS, USPS and other trademarks are the property of their respective trademark holders. None of the trademark holders are affiliated with JobTestPrep or this website.
;
Not what you were looking for?
?